? Install the radio set and its antenna as far away as possible from the control modules and control unit.
? The antenna feeder and power cable generate radio waves, therefore, keep them 100 mm {3.94 in} or more from the control modules, control unit, and wiring harness. If the antenna feeder and power cable cross over the wiring harness, place them perpendicular to the wiring harness.
? Do not install a high output radio set.
? Do not use the control modules and control unit power source for the radio set. In addition, do not use the cigar lighter and accessory socket power source.
? Do not attach the antenna feeder or wiring harness of the radio set to the wiring harness, fuel pipe, or brake tube of the vehicle.
? Do not install any radio set-related devices in the area where the air bag module deploys to prevent a secondary accident if the air bag were to deploy.
ac9wzn00001136
|
? After installing the radio set, perform a test transmission with the engine idling to verify that it does not affect engine control.