OIL PRESSURE INSPECTION [SKYACTIV-G 2.5T]
id0111q8800300
1. Connect the M-MDS to the DLC-2.
2. Start the engine and warm it up.
3. Select the engine hydraulic pressure (PID: EOP) and the engine speed (PID: RPM) using the M-MDS data monitor function.
4. Verify the engine hydraulic pressure (PID: EOP) value while the engine maintains a constant speed.
-
• If not within the specification, determine the malfunctioning location referring to the following DTCs “Possible Cause” and repair or replace the applicable part.
-
? P0524:00 (Engine oil pressure too low)
? P06DD:00 (Engine oil pressure switch control circuit high input)
? P06DE:00 (Engine oil pressure switch control circuit low input)
-
Note
-
• The oil pressure can vary with oil viscosity, temperature, and engine speed.
-
Oil pressure (reference value) [oil temperature: 80—90 °C {176—194 °F}, coolant temperature: 80—90 °C {176—194 °F}]
-
Lo: 135—165 kPa {1.38—1.68 kgf/cm2, 19.6—23.9 psi} [1,500 rpm]
Hi: 225—275 kPa {2.30—2.80 kgf/cm2, 32.7—39.8 psi} [4,500 rpm]