ENGINE OIL DATA RESET [SKYACTIV-G 2.5T]

id0140h0444700

Note

•  If the engine oil was replaced with the engine oil maintenance monitor function ON, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM regardless of whether or not the wrench indicator light is illuminated.

Engine oil data reset procedure

1.  Switch the ignition ON (engine off) and switch the display using the panel light control switch/tripmeter switch to display the odometer.

Caution

•  The tripmeter and average fuel economy are reset when the following procedures are performed with tripmeter A or B displayed.

2.  Switch the ignition OFF (LOCK).

3.  Press and hold the panel light control switch/tripmeter switch with the ignition switched off, then switch the ignition ON (engine off).

?  Keep pressing the panel light control switch/tripmeter switch for more than 7 s.