MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-G 2.5T]

id0140h0900300

Note

•  The MAF sensor and IAT sensor No.1 cannot be removed as a single unit. When replacing the MAF sensor or IAT sensor No.1, replace the MAF sensor/IAT sensor No.1.

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Disconnect the MAF sensor/IAT sensor No.1 connector.

3.  Remove the screws.

ac9uuw00006042

4.  Remove the MAF sensor/IAT sensor No.1.

5.  Install in the reverse order of removal.