WHEEL UNIT ID REGISTRATION [DIRECT TIRE PRESSURE MONITORING SYSTEM (TPMS) (WITHOUT TPMS SET SWITCH)]

id0212008004f8

Note

•  After the wheel unit replacement, registration of the wheel unit identification codes must be performed.

1.  Switch the ignition ON (engine off or on).

2.  Switch the ignition off.

3.  Leave the vehicle with the ignition switched off for 15 min or more.

4.  Switch the ignition ON (engine on).

5.  Drive the vehicle at a speed of 25 km/h {16 mph} or more for 10 min or more.

6.  After driving for 10 min, verify that the TPMS warning light does not flash and is not illuminated.