BRAKES TECHNICAL DATA
id045000800100
|
Item |
Specification |
|---|---|
|
Brake fluid type
|
SAE J1703 or FMVSS116 DOT-3 or DOT-4
|
|
Brake pedal height (reference value)
|
104.7 mm {4.122 in}
|
|
Brake pedal play
|
4.7 mm {0.19 in} or less
|
|
Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})
|
66.7 mm {2.63 in} or more
|
|
Front disc plate runout limit
|
0.04 mm {0.002 in}
|
|
Minimum front disc plate thickness
|
26.0 mm {1.02 in}
|
|
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
|
26.8 mm {1.06 in}
|
|
Minimum front disc pad thickness
|
2.0 mm {0.079 in}
|
|
Rear disc plate runout limit
|
0.1 mm {0.004 in}
|
|
Minimum rear disc plate thickness
|
9.0 mm {0.35 in}
|
|
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle
|
9.8 mm {0.39 in}
|
|
Minimum rear disc pad thickness
|
2.0 mm {0.079 in}
|
Master cylinder fluid pressure
|
Vacuum amount at 0 kPa {0 mmHg, 0 inHg} |
|
|---|---|
|
Pedal force |
Fluid pressure |
|
200 N {20.4 kgf, 45.0 lbt}
|
610 kPa {6.22 kgf/cm2, 88.5 psi} or more
|
Master cylinder fluid pressure
|
Vacuum amount at 66.7 kPa {500 mmHg, 19.7 inHg} |
|
|---|---|
|
Pedal force |
Fluid pressure |
|
200 N {20.4 kgf, 45.0 lbt}
|
6,350 kPa {64.75 kgf/cm2, 921.0 psi} or more
|
Degree of vacuum in vacuum pump standard (reference)
|
Measurement condition |
Specification |
|||
|---|---|---|---|---|
|
Engine rotation speed |
Brake pedal |
Measurement-start vacuum |
Measurement-stop vacuum |
|
|
While idling
|
Depressed
|
60 kPa {450 mmHg, 18 inHg}
|
67 kPa {503 mmHg, 20 inHg}
|
Within 8 s
|
Degree of maximum attained vacuum in vacuum pump standard (reference)
|
Measurement condition |
Specification |
|
|---|---|---|
|
Engine rotation speed |
Measurement time |
|
|
While idling
|
No time designation
|
93.3 kPa {700 mmHg, 27.6 inHg} or more
|