DTC U3000:42 [AUTO LEVELING CONTROL MODULE]

id090277018100

Description	Auto leveling control module internal malfunction
Detection condition	• Auto leveling control module detects the internal EEPROM malfunction.
Fail-safe	• The headlight leveling actuator is stopped at the position when the malfunction is determined.
Possible cause	• Auto leveling control module internal malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY IF MALFUNCTIONING LOCATION IS AUTO LEVELING CONTROL MODULE DEPENDING ON REPEATABILITY • Clear the auto leveling control module DTCs using the M-MDS. (See CLEARING DTC [AUTO LEVELING CONTROL MODULE].) • Retrieve the auto leveling control module DTCs using the M-MDS. (See DTC INSPECTION [AUTO LEVELING CONTROL MODULE].) • Is the same DTC displayed?	Yes	Replace the auto leveling control module, then go to the next step. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED • Are any other DTCs displayed?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [AUTO LEVELING CONTROL MODULE].)
2		No	DTC troubleshooting completed.