CLEARING DTC [AUDIO AMPLIFIER]

id0902f8855600

Caution

•  If the memory is cleared, past malfunctions may no longer be displayed, therefore before clearing DTCs, record all DTCs displayed in the DTC inspection on the Audio Repair Order Form.

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

(1)  Select “Self Test”.

(2)  Select “All CMDTCs”.

3.  Verify the DTC according to the directions on the screen.

4.  Press the clear button on the DTC screen to clear the DTC.

5.  Switch the ignition off.

6.  Switch the ignition ON (engine off or on) and wait for 5 s or more.

7.  Perform DTC inspection. (See DTC INSPECTION [AUDIO AMPLIFIER].)

8.  Verify that no DTCs are displayed.