PID/DATA MONITOR TABLE [MAZDA ERA-GLONASS CONTROL MODULE]
id0902r6084100
|
PID |
Unit/Operation |
Data contents |
Inspection terminal(s) |
|---|---|---|---|
|
ACC_CTRL
|
Shutdown/Normal
|
Indicates ACC power supply control status
• Shutdown: Shuts down ACC power supply
• Normal: Outputs ACC power supply
|
1X, 1Z, 1AB, 1AD
|
|
ACC_SHUTD1
|
hh:mm:ss
|
Indicates ACC power supply shutdown record
|
1Z, 1AD
|
|
ACC_SHUTD2
|
hh:mm:ss
|
||
|
ACC_SHUTD3
|
hh:mm:ss
|
||
|
ACC_VOLT1
|
V
|
Displays ACC1 terminal output voltage.
|
1Z
|
|
ACC_VOLT2
|
V
|
Displays ACC2 terminal output voltage.
|
1AD
|
|
BACKUP_BATT
|
V
|
Displays Mazda ERA-GLONASS control module battery voltage.
|
—
|
|
BODY_TYPE
|
Unknown/Sedan/Wagon/Hatch_back/2DR_Open
|
Indicates body type
|
1Q, 1S
|
|
CRASH_RELAY
|
Low/High
|
Indicates current value of event notification signal 2 (ENS2)
• Low: Collision detection
• High: Normal status or collision determination system malfunction
|
1AC
|
|
CRASH_RELAY
|
Normal/Occurred/Completed/System_Error/Invalid
|
Indicates current value of event notification signal 2 (ENS2)
• Normal: Normal
• Occurred: Collision detection
• Completed: Collision detection signal output completed
• System_Error: Collision determination system malfunction
• Invalid: Collision detection signal error
|
1AC
|
|
DCM_MODE
|
Factory/Factory/Market
|
Indicates current mode for Mazda ERA-GLONASS control module
|
—
|
|
GNSS_ALTI
|
—
|
Indicates altitude above sea level
|
2A
|
|
GNSS_FIX
|
No_Fix/2D_Fix/3D_Fix/Antenna_Error
|
Indicates positioning mode for TEL antenna
• No_Fix: No positioning
• 2D_Fix: 2D mode
• 3D_Fix: 3D mode
• Antenna_Error: TEL antenna error
|
2A
|
|
GNSS_HEAD
|
°
|
Indicates measured travel direction based on magnetic north
|
2A
|
|
GNSS_LATI
|
—
|
Indicates latitude
|
2A
|
|
GNSS_LONGI
|
—
|
Indicates longitude
|
2A
|
|
GNSS_UTC
|
hh:mm:ss
|
Indicates UTC (Universal Time, Coordinated)
|
2A
|
|
GNSS_VELO
|
—
|
Indicates speed
|
2A
|
|
IG_POWER
|
Off/On
|
Indicates Mazda ERA-GLONASS control module power supply (IG1) status
• OFF: IG1 power supply voltage malfunction
• ON: Normal IG1 power supply voltage
|
1AE
|
|
MICROPHONE
|
V
|
Displays microphone power supply voltage.
|
1E
|
|
MUTE_SIGNAL
|
hh:mm:ss
|
Transmission completion record of mute signal/unmute signal
|
1Q, 1S, 1AC
|
|
SOS_SW
|
Low/High
|
Indicates that Mazda ERA-GLONASS switch is pressed and held
• Low: Mazda ERA-GLONASS switch is not pressed
• High: Mazda ERA-GLONASS switch is pressed
|
1B
|
|
STATUS_LAMP
|
Off/On
|
Indicates indicator control status
• Off: System operation status is not displayed
• On: System operation status is displayed
|
1A, 1C
|
|
TEL_SIGNAL
|
—
|
Displays reception signal level of TEL antenna (displays in 5 stages)
|
3A
|
|
VEH_NAME
|
—
|
Indicates vehicle's name
|
1Q, 1S
|
|
VPWR
|
V
|
Displays Mazda ERA-GLONASS control module power supply (B+) voltage.
|
1AF
|
|
WARN_LAMP
|
Off/On
|
Indicates indicator control status
• Off: Warning indication is not performed
• ON: Warning indication is performed
|
1A, 1C
|