CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE

id092000013100

Note

• Settings of some personalization features cannot be switched depending on the vehicle specification.

Distance Recognition Support System (DRSS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Distance Recognition Support System] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Mode	The operation of distance recognition support system (DRSS) can be turned off.	On	On / Off	Radar unit
Warning Distance	The operation distance for the alert function can be changed.	Near	Far / Medium / Near	Radar unit
Reset	Returns the setting content of the distance recognition support system to the initial setting.	No	No / Yes	Radar unit

Traffic Sign Recognition System (TSR)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Traffic Sign Recognition System] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Traffic Sign Display	The operation of traffic sign recognition system (TSR) can be turned off.	On	On / Off	Forward sensing camera (FSC)
Speed Limit Alert	The warning pattern of the excessive speed warning can be changed.	Off	Off / Visual / Audio & Visual	Instrument cluster
Alert Threshold	The activation timing for the excessive speed warning can be changed.	+0	+0 / +5 / +10	Instrument cluster
Reset	Returns the setting content of the traffic sign recognition system (TSR) to the initial setting.	No	No / Yes	Instrument cluster

Smart City Brake Support [Forward/Reverse] (SCBS F/R) (VIN serial No. 100001—)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Smart City Brake Support	The Smart City Brake Support (SCBS) can be switched between operable and inoperable.	On	On / Off	Laser sensor

Smart Brake Support (SBS) (VIN serial No. 100001—)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Smart Brake Support] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Mode	The operation of Smart Brake Support (SBS) can be turned off.	On	On / Off	Radar unit
Warning Distance	The distance at which the collision warning activates can be changed.	Near	Near / Far	Radar unit
Volume	The volume of Smart Brake Support (SBS) warning alarm can be changed.	High	High / Low / Off	Radar unit
Reset	Returns the setting content of the smart brake support (SBS) system to the initial setting.	No	No / Yes	Radar unit

Advanced Smart City Brake Support (Advanced SCBS)/Smart City Brake Support [Reverse] (SCBS R)/Smart Brake Support (SBS) (VIN serial No. 200001— (Except European (L.H.D.) specs.), 500001— (European (L.H.D.) specs.))

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Smart City Brake Support] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Smart Brake Support	The operation of Advanced Smart City Brake Support (Advanced SCBS)/Smart City Brake Support [Reverse] (SCBS R)/Smart Brake Support (SBS) can be turned off.	On	On / Off	• Forward sensing camera (FSC) • Radar unit
Warning Distance	The distance at which the collision warning activates can be changed.	Mid	Near / Mid / Far	• Forward sensing camera (FSC) • Radar unit
Volume	The volume of Advanced Smart City Brake Support (Advanced SCBS)/Smart City Brake Support [Reverse] (SCBS R)/Smart Brake Support (SBS) warning alarm can be changed.	High	High / Low / Off	• Forward sensing camera (FSC) • Radar unit
Reset	Returns the setting content of the Advanced Smart City Brake Support (Advanced SCBS)/Smart City Brake Support [Reverse] (SCBS R)/Smart Brake Support (SBS) to the initial setting.	No	No / Yes	• Forward sensing camera (FSC) • Radar unit

Blind Spot Monitoring (BSM) System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Blind Spot Monitoring Volume	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	High / Low / Off	Instrument cluster

Lane Departure Warning System (LDWS) AND Lane-keep Assist System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Lane -keep Assist System] on the center display.

5. Select an item name, and then select option.

Display of center display		Function	Initial setting	Settings	Control module
Intervention		The operation of steering wheel operation assist can be turned off.	On	On / Off	Forward sensing camera (FSC)
Intervention		The operation timing of steering wheel operation assist can be changed.	Late	Early / Late	Forward sensing camera (FSC)
Intervention is ON	Intervention Timing		Late	Early / Late	Forward sensing camera (FSC)
	Sensitivity	The operation sensitivity of steering wheel operation assist can be changed.	High	High / Medium / Low	Forward sensing camera (FSC)
	Lane Departure Alert	The operation of the lane departure warning system (LDWS) and lane-keep assist system warning can be turned off.	On	On/Off	Forward sensing camera (FSC)
Intervention is OFF	Alert Timing	The operation timing of lane departure warning system (LDWS) and lane-keep assist system warning can be changed.	Outside_Line	Automatically / Inside_Line / On_Line / Outside_Line	Forward sensing camera (FSC)
Intervention is OFF	Sensitivity	The warning operation sensitivity of lane departure warning system (LDWS) and lane-keep assist system warning can be changed.	Mid_LO	High / Mid_LO / LO	Forward sensing camera (FSC)
Alert Type		The type of the lane departure warning system (LDWS) and lane-keep assist system warning (type of sound or vibration) can be changed.	Vibration	Vibration / Beep / Rumble Strip	• Forward sensing camera (FSC) • Instrument cluster • EPS control module
Beep Volume		The volume of the lane departure warning sound (beep) can be changed.	Low	High / Low	• Forward sensing camera (FSC) • Instrument cluster
Rumble Strip Volume		The volume of the lane departure warning sound (rumble strip) can be changed.	Low	High / Mid / Low	• Forward sensing camera (FSC) • Instrument cluster
Vibration Strength		The strength of steering wheel vibration can be changed.	Low	High / Low	• Forward sensing camera (FSC) • EPS control module
Reset		Returns the setting content of the lane keep assist system to the initial setting.	No	No / Yes	• Forward sensing camera (FSC) • Instrument cluster • EPS control module

Driver Attention Alert System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Driver Alert	The system can be changed so that driver attention alert does not operate.	On	On / Off	Parking assist unit

Door Lock System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Door Lock] on the center display.

5. Select an item name, and then select option.

Hands-Free Liftgate

Display of center display	Function	Initial setting	Settings	Control module
Hands-Free Liftgate	The hands-free liftgate can be switched ON/OFF.	ON	ON / OFF	Connectivity master unit (CMU)

Power Door Lock System

Display of center display	Function	Initial setting	Settings	Control module
Auto Door Lock Mode	Auto door lock function can be changed.	Lock: When Driving Unlock: IGN Off	Lock: When Driving Unlock: InPark / Lock: Out of Park Unlock: InPark / Lock: Shifting Out of Park / Lock: When Driving Unlock: IGN Off / Lock: When Driving/ Off	Rear body control module (RBCM)
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Rear body control module (RBCM) • Start stop unit

Advanced keyless entry system

Display of center display	Function	Initial setting	Settings	Control module
Keyless Lock Beep Volume	The keyless beeper volume can be adjusted.	Off or Medium^*1	High / Medium / Low / Off	Start stop unit
Auto Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	90 seconds / 60 seconds / 30 seconds	Start stop unit
Walk Away Lock	The out-of-area (reception area) type auto lock function can be set.	Off	On / Off	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Rear body control module (RBCM) • Start stop unit

*1 :The initial value differs depending on the market.

Keyless entry system

Display of center display	Function	Initial setting	Settings	Control module
Auto Door Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	90 seconds / 60 seconds / 30 seconds	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Rear body control module (RBCM) • Start stop unit

Lighting Systems

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Lighting] on the center display.

5. Select an item name, and then select option.

Room light control system

Display of center display	Function	Initial setting	Settings	Control module
Interior Light Timeout - Door Open	• The front/rear map light illumination time after any door is opened can be changed. • The trunk compartment light illumination time after the trunk lid is opened can be changed.	30 minutes	60 minutes / 30 minutes / 10 minutes	Rear body control module (RBCM)
Interior Light Timeout - Door Closed	The front/rear map light illumination time after all the doors are closed can be changed.	15 seconds	60 seconds / 30 seconds / 15 seconds / 7.5 seconds	Rear body control module (RBCM)
Interior Lightning Brightness	The ambient light brightness can be changed when the TNS (parking lights) are turned on.	Medium	Bright / Medium / Dark / Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

High beam control (HBC) system

Display of center display	Function	Initial setting	Settings	Control module
High Beam Control	The high beam control (HBC) system can be switched between operable and inoperable.	On	On / Off	Forward sensing camera (FSC)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

Adaptive LED headlight system

Display of center display	Function	Initial setting	Settings	Control module
Adaptive High Beam Control	The adaptive LED headlights function can be changed.	On	On / Off	Adaptive LED headlights control module
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

Lights-on reminder warning alarm

Display of center display	Function	Initial setting	Settings	Control module
Light On Reminder Vol	The volume for the lights-on reminder warning alarm can be changed.	OFF / Low / High ^*1	OFF / Low / High	Instrument cluster
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

*1 :The initial value differs depending on the market.

Running Light System (General (L.H.D. R.H.D.), Australian Specs.)

Display of center display	Function	Initial setting	Settings	Control module
Daytime Running Lights	The DRL system function can be set.	On	On / Off	Front body control module (FBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

Auto light system

Display of center display	Function	Initial setting	Settings	Control module
Auto Headlight On	Auto light sensor sensitivity can be changed.	Medium	Light / Medium Light / Medium / Medium Dark / Dark	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

Coming home light

Display of center display	Function	Initial setting	Settings	Control module
Coming Home Light	The coming home light system operation time can be switched.	30 seconds	120 seconds / 90 seconds / 60 seconds / 30 seconds / Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

Leaving home light

Display of center display	Function	Initial setting	Settings	Control module
Leaving Home Light	The leaving home light can be switched between operable and inoperable.	On or Off^*1	On / Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module

*1 :The initial value differs depending on the market.

Auto Wiper System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Rain Sensing Wiper	The auto wiper function can be disabled.	On	On / Off^*1	Rear body control module (RBCM)

*1 :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Turn Light System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Turn] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
3-flash Turn Signal	The turn light system can be switched between operable and inoperable.	On or Off^*1	On / Off	Rear body control module (RBCM)
Turn Signal Volume	The volume of the turn and hazard indicator alarm can be changed.	High	High / Low	Rear body control module (RBCM)
Reset	Returns the setting content of the turn light system to the initial setting.	No	No / Yes	Rear body control module (RBCM)

*1 :The initial value differs depending on the market.

Language

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Language	The display language can be changed.	English	Depends on market^*1	Connectivity master unit (CMU)

*1 :Available only in display from the center display.

Distance

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Distance	The distance unit can be changed.	Miles or km^*1	Miles or km	Instrument cluster

*1 :The initial value differs depending on the market.

Temperature

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Temp^*1	The temperature unit can be changed.	°F or °C^*2	°F /°C	Instrument cluster

*1 :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

*2 :The initial value differs depending on the market.

Parking sensor system

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Parking Sensor Indication	The parking sensor information can be displayed on the center display.	On	On / Off	Parking assist unit (ultrasonic)
Reset	Returns the setting content of the parking sensor system to the initial setting.	No	No / Yes	Parking assist unit (ultrasonic)

Active driving display

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [AD-Disp] on the center display.

4. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Active Driving Display	Setting can be changed so that the active driving display is not displayed.	On	On / Off	Instrument cluster
Height	The display height (up/down position) can be changed.	0	13 steps up/down from initialsetting (total: 27steps)	Instrument cluster
Brightness Control	The method for adjusting the display brightness (automatically/manually) can be changed.	AUTO	AUTO / MANUAL	Instrument cluster
Brightness	The standard brightness with the manual brightness adjustment can be changed.	0	20 steps up / down from initial setting (total: 41steps)	Instrument cluster
Rotate	The tilt of the displayed image can be adjusted.	0	3 steps up / down from initial setting (total: 7steps)	Instrument cluster
Navigation system guidance	Setting can be changed so that the navigation system guidance is not displayed.	On	On / Off	Instrument cluster

Fuel Economy Monitor

1. Switch the ignition ON (engine off or on).

2. Select [Application] on the center display.

3. Select [Fuel economy monitor] on the center display.

4. Press the setting button on the menu screen.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Settings	Control module
Show Screen at Ignition Off	The ending screen of the fuel monitor can be switched between display/non-display.	Off	On / Off	Connectivity master unit (CMU)
Sync Average and Trip A	The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off.	Off	On / Off	Connectivity master unit (CMU)

360° view monitor system

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [360° View Monitor] on the center display.

5. Select an item name, and then select option.

Display of center display	Function	Initial setting	Setting contents	Control unit
Auto display after engine start	Automatically displays the 360°view monitor system when the ignition is switched ON (engine on).	Off	On / Off	• 360° view monitor control module • Connectivity master unit (CMU)
The predicted vehicle track display	The predicted vehicle track display can be switched between display/non-display.	On	On / Off	• 360° view monitor control module • Connectivity master unit (CMU)
Front view Display	The display of the top view/front view while driving the vehicle in the forward direction after reversing can be switched between display/non-display.	On	On / Off	• 360° view monitor control module • Connectivity master unit (CMU)
Reset	The settings for the 360° view monitor system can be reset to the initial values.	—	No / Yes	• 360° view monitor control module • Connectivity master unit (CMU)