AUXILIARY JACK/USB PORT/SD CARD SLOT HUB INSPECTION

id092000031800

Note

•  The integrity of the auxiliary jack/USB port/SD card slot hub cannot be determined by a single unit inspection. When inspecting the auxiliary jack/USB port/SD card slot hub, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the connectivity master unit (CMU) DTC inspection and verify if DTCs related to the auxiliary jack/USB port/SD card slot hub are detected. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT].)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT].)

•  If DTCs are not detected, repair the malfunctioning location according to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]].)