RELAY INSPECTION

id092100800300


Relay Type

Connector type

Part name
Type A
•  TNS relay
•  A/C relay
•  Headlight HI relay
•  Fuel pump relay
•  Fuel injector relay
•  Headlight LO relay No.1
•  IG1 relay
•  Starter relay
•  DRL relay
•  ACC relay
•  Rear blower relay
•  Electric variable valve timing relay
•  Headlight LO relay No.2
•  Rear window defogger relay
•  Front fog light relay
•  Main relay
•  Heated steering wheel relay
•  Horn relay
•  Ignition relay (IG1_STAB)
•  Ignition relay (ACC_STAB)
•  Outlet relay
•  Windshield wiper de-icer relay
•  Electric AT oil pump relay
Type B
•  Brake light relay
Type C
•  Front blower relay
•  Cooling fan relay

Type A

1.  Remove the relay. (See RELAY LOCATION.)

2.  Verify the continuity between relay terminals C and D.

am6zzw00009104
•  If it can be verified, replace the relay. (See RELAY LOCATION.)
•  If it cannot be verified, go to the next step.

3.  Verify the continuity between relay terminals E and A.

•  If it can be verified, go to the next step.
•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)

4.  Apply battery voltage to relay terminal E, and connect terminal A to ground.

5.  Verify the continuity between relay terminals C and D.

•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)


Type B

1.  Remove the relay. (See RELAY LOCATION.)

2.  Verify the continuity between relay terminals C and D.

adejjw00009219
•  If it can be verified, replace the relay. (See RELAY LOCATION.)
•  If it cannot be verified, go to the next step.

3.  Verify the continuity between the relay terminals E and A.

•  If it can be verified, go to the next step.
•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)

4.  Verify the continuity between the relay terminals B and D.

•  If it can be verified, go to the next step.
•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)

5.  Apply battery voltage to relay terminal E, and connect terminal A to ground.

6.  Verify the continuity between relay terminals C and D.

•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)


Type C

1.  Remove the relay. (See RELAY LOCATION.)

2.  Verify the continuity between the relay terminals C and A.

adejjw00009220
•  If it can be verified, replace the relay. (See RELAY LOCATION.)
•  If it cannot be verified, go to the next step.

3.  Verify the continuity between the relay terminals D and B.

•  If it can be verified, go to the next step.
•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)

4.  Apply battery voltage to relay terminal D, and connect terminal B to ground.

5.  Verify the continuity between relay terminals C and A.

•  If it cannot be verified, replace the relay. (See RELAY LOCATION.)