MAZDA ERA-GLONASS CONTROL MODULE CONFIGURATION

id092200667100

VIN verification procedure

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

1.  Select "Electrical" .

3.  Then, select items from the screen menu in the following order.

1.  Select "DCM" .

2.  Select "Configuration mode" .

3.  Select "Read VIN" .

4.  Perform the procedure according to the directions on the screen.

ICCID verification procedure

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

1.  Select "Electrical" .

3.  Then, select items from the screen menu in the following order.

1.  Select "DCM" .

2.  Select "Configuration mode" .

3.  Select "Read ICCID" .

4.  Perform the procedure according to the directions on the screen.

VIN entry procedure

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

1.  Select "Electrical" .

3.  Then, select items from the screen menu in the following order.

1.  Select "DCM" .

2.  Select "Configuration mode" .

3.  Select "Install new module" .

4.  Select "Input VIN" or "Copy and Paste".

4.  Perform the procedure according to the directions on the screen.