DTC U0010:88/U0100:00/U0131:00/U0140:00/U0155:00/U0159:00/U0214:00/U0232:00 [360°VIEW MONITOR CONTROL MODULE]

id1502c7055200

Description
•  U0010:88
?  Module communication error (MS-CAN)
•  U0100:00
?  Communication error with PCM
•  U0131:00
?  Communication error with electric power steering (EPS) control module
•  U0140:00
?  Communication error with front body control module (FBCM)
•  U0155:00
?  Communication error with instrument cluster
•  U0159:00
?  Communication error with parking assist unit
•  U0214:00
?  Communication error with start stop unit
•  U0232:00
?  Communication error with blind spot monitoring (BSM) control module (LH)
Detection condition
•  U0010:88
?  The 360°view monitor control module detects a CAN bus communication line (MS-CAN) malfunction.
•  U0100:00
?  The 360°view monitor control module cannot receive CAN signal from the PCM.
•  U0131:00
?  The 360°view monitor control module cannot receive CAN signal from the electric power steering (EPS) control module.
•  U0140:00
?  The 360°view monitor control module cannot receive CAN signal from the front body control module (FBCM).
•  U0155:00
?  The 360°view monitor control module cannot receive CAN signal from the instrument cluster.
•  U0159:00
?  The 360°view monitor control module cannot receive CAN signal from the parking assist unit.
•  U0214:00
?  The 360°view monitor control module cannot receive CAN signal from the start stop unit.
•  U0232:00
?  The 360°view monitor control module cannot receive CAN signal from the blind spot monitoring (BSM) control module (LH).
Fail-safe
•  U0010:88
?  Not applicable
•  U0100:00
?  360°view monitor display period on center display is fixed at 8 s
•  U0131:00
?  Projected vehicle path is not displayed when system is starting
•  U0140:00
?  Not applicable
•  U0155:00
?  Selector lever or shift lever position information received directly before detecting a malfunction is maintained.
•  U0159:00
?  Parking sensor status icon is displayed
•  U0214:00
?  Not applicable
•  U0232:00
?  Rear Cross Traffic Alert (RCTA) status icon is displayed
Possible cause
•  Malfunction in CAN bus communication line
•  Malfunction in CAN line between PCM and 360°view monitor control module
•  Malfunction in CAN line between electric power steering (EPS) control module and 360°view monitor control module
•  Malfunction in CAN line between front body control module (FBCM) and 360°view monitor control module
•  Malfunction in CAN line between instrument cluster and 360°view monitor control module
•  Malfunction in CAN line between parking assist unit and 360°view monitor control module
•  Malfunction in CAN line between start stop unit and 360°view monitor control module
•  Malfunction in CAN line between blind spot monitoring (BSM) control module (LH) and 360°view monitor control module
System wiring diagram
Not applicable

Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See FOREWORD [L.H.D.].) (See FOREWORD [R.H.D.].)