FOREWORD [360°VIEW MONITOR SYSTEM]
id1503b8004000
Special Service Tool (SST)
|
49US 15 1A0
PROBE KIT
|
 |
• If there is any vehicle malfunction complaint lodged by a customer, perform malfunction diagnosis according to the troubleshooting procedure. (See
Troubleshooting Procedure)
Troubleshooting Procedure
Action for Non-repeatable Malfunction
• If the malfunction does not recur, verify the malfunction cause by performing the following actions:
-
? Based on the repair order form, attempt to drive the vehicle or perform tests to replicate the malfunction, record the data at that time, and detect the malfunction cause.
? Shake the wiring harness or connector of the electrical component which is suspected to be the cause of the malfunction, and inspect for occurrence of any malfunction or DTCs.
? Inspect the female terminals on the connector of the electric component which is suspected to be the cause of the malfunction for poor connection. (See
ELECTRICAL SYSTEM.)
-
Note
-
• SST (Reference): PROBE KIT (49US 15 1A0)
Effects of Non-Genuine, After-market Electrical Components
• A malfunction may occur due to noise interference from a non-genuine, after-market electrical component.
• If a non-genuine, after-market electrical component is installed, disconnect the connector or unplug from the 12 V accessory socket and verify that the malfunction recurs. If the malfunction does not recur, it is highly possible that the malfunction is caused by the non-genuine, after-market electrical component.
