MRCC INITIALIZATION SETTING

id152000004300

Warning

•  If the MRCC initial setting is not completed, the Mazda radar cruise control (MRCC) system, smart brake support (SBS) system, and the distance recognition support system (DRSS) will not operate normally which could lead to an unexpected accident. Therefore, when performing the following work, always perform the MRCC initial setting so that the MRCC system, SBS system, DRSS operate normally.

?  SAS control module removal/installation

Note

•  The initial setting may finish abnormally for the following reasons: If it finishes abnormally, after completion of repairs, then perform the MRCC initial setting again.

?  Vehicle moves/shakes during initial setting (such as getting in vehicle, opening door)

?  SAS control module malfunction

?  Abnormal battery voltage

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

(1)  Select "Electrical".

(2)  Select "SBS/MRCC".

(3)  Select "System Initialize".

3.  Perform the MRCC initial setting following the instructions on the screen.