INAPPROPRIATE OPERATION AND CONTROL RECORD [PCM (SKYACTIV-G 2.5T)]

id0102s8042900

How to Use

Note

• Because the inappropriate operation and control record cannot be cleared, always check the odometer value and verify that repairs have not already been performed.

• If any inappropriate operation and control record is displayed, refer to the corresponding troubleshooting for the inappropriate operation and control code to explain to the customer, and perform malfunction diagnosis. (See Inappropriate Operation and Control Code Table)

Operation Procedure

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initial screen.

(1) “Operational Record”

3. Then, select the followings from the screen menu.

(1) “Inappropriate Operation and Control Record”

(2) “PCM”

4. Display the DTC store record history according to the screen instructions.

Inappropriate Operation and Control Code Table

Inappropriate operation and control code	Inappropriate operation and control code type	Reference
0x30	Temperature restriction control	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL) [PCM (SKYACTIV-G 2.5T)].)
0x42	Generator connection malfunction	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x42 (UNUSUAL CONNECTION WITH A GENERATOR) [PCM (SKYACTIV-G 2.5T)].)
0x43	Abnormal battery/capacitor (i-ELOOP) voltage	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY OR CAPACITOR) [PCM (SKYACTIV-G 2.5T)].)