THERMOSTAT INSPECTION [SKYACTIV-G 2.5T]
id0112q5801300
1. Remove the thermostat. (See THERMOSTAT REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)
2. Visually check that the thermostat valve is closed.
3. Place the thermostat in water.
-
Warning
-
• During inspection, the thermostat and water are extremely hot and can cause severe burns. Do not touch the thermostat and water.
4. Heat the water and check the following.
-
• Opening temperature and valve lift
-
? If there is a malfunction, replace the thermostat.
-
Thermostat initial-opening temperature
-
Australian, Taiwan specs.: 86.5—89.5 °C {188—193 °F}
Except Australian, Taiwan specs.: 80.5—83.5 °C {177—182 °F}
-
Thermostat full-open temperature
-
Australian, Taiwan specs.: 100 °C {212 °F}
Except Australian, Taiwan specs.: 95 °C {203 °F}
-
Thermostat full-open lift
-
8.5 mm {0.33 in} or more