PURGE SOLENOID VALVE INSPECTION [SKYACTIV-G 2.5T]

id0116q4800900


Airflow Inspection

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

3.  Inspect airflow between the ports under the following conditions.

ac5uuw00002688

Measured condition

Continuity between ports A—B
When voltage is not applied between terminals A and B
No airflow
When voltage is applied between terminals A and B
Airflow detected
•  If not as specified, replace the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)