CANISTER VENT (CV) SOLENOID VALVE INSPECTION [SKYACTIV-G 2.5T]

id0116q4819200


Taiwan


Airflow inspection

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the CV solenoid valve. (See CANISTER VENT (CV) SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

3.  Inspect airflow between the ports under the following conditions.

ac5uuw00004734

Measured condition

Continuity between A—B
When voltage is not applied between terminals A and B
Airflow detected
When voltage is applied between terminals A and B
No airflow
•  If not as specified, replace the CV solenoid valve. (See CANISTER VENT (CV) SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)
•  Should assume the voltage 12V (D.C.).
•  Terminals A and B is nonpolar.