DTC U053B:00 [DSC HU/CM]
id040262848700
|
DTC
|
U053B:00
|
Signal error from forward sensing camera (FSC)
|
|
DETECTION CONDITION
|
• Error detected in signal from forward sensing camera (FSC) via CAN communication.
|
|
|
FAIL-SAFE FUNCTION
|
• Refer to “Fail-safe function table”. (See DTC TABLE [DSC HU/CM].)
|
|
|
POSSIBLE CAUSE
|
• Forward sensing camera (FSC) malfunction
|
|
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
INSPECT FOR FORWARD SENSING CAMERA (FSC) MALFUNCTION
• Switch the ignition to off.
• Using the M-MDS, perform the DTC inspection for the forward sensing camera (FSC).
• Are any DTCs detected?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
(See CLEARING DTC [DSC HU/CM].)
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, replace the forward sensing camera (FSC), then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
|
No
|
DTC troubleshooting completed.
|
||