DTC C0082:68 [DSC HU/CM]
id040262889900
|
DTC
|
C0082:68
|
ABS control
|
|
DETECTION CONDITION
|
• ABS control continuing for 60 s or more is detected.
|
|
|
FAIL-SAFE FUNCTION
|
• Refer to “Fail-safe function table”. (See DTC TABLE [DSC HU/CM].)
|
|
|
POSSIBLE CAUSE
|
• Constant control over an extended period of time is inhibited to protect engine or solenoid valves inside DSC HU/CM, however, this is not a malfunction
|
|
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY DSC HU/CM DTC
• Using the M-MDS, clear the DTC from the DSC HU/CM.
(See CLEARING DTC [DSC HU/CM].)
• Using the M-MDS, perform the DSC HU/CM DTC inspection.
(See DTC INSPECTION [DSC HU/CM].)
• Is the same DTC present?
|
Yes
|
Replace the DSC HU/CM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY NO DTC IS PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
|
No
|
DTC troubleshooting completed.
|
||