NO.8 SMART CITY BRAKE SUPPORT (SCBS) INDICATOR LIGHT STAY ON AND A MESSAGE "SCBS Inspection Required" IS INDICATED IN THE DISPLAY [DYNAMIC STABILITY CONTROL (DSC)]
id0403b2848800
|
8 |
Smart City Brake Support (SCBS) indicator light stay on and a message “SCBS Inspection Requires” is indicated in the display |
|---|---|
|
POSSIBLE CAUSE
|
• Laser sensor internal malfunction.
• DSC HU/CM internal malfunction.
• DSC HU/CM detects a malfunction (input and output device malfunction).
• PCM and/or instrument cluster internal malfunction.
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM LASER SENSOR DTC
• Retrieve the laser sensor DTC using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [LASER SENSOR].)
|
|
No
|
Go to the next step.
|
||
|
2
|
CONFIRM DSC HU/CM DTC
• Retrieve the DSC HU/CM DTC using the M-MDS.
(See DTC INSPECTION [DSC HU/CM].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
|
No
|
Go to the next step.
|
||
|
3
|
CONFIRM PCM DTC
• Retrieve the PCM DTC using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Retrieve the instrument cluster DTC using the M-MDS.
• If any DTCs are present, go to the applicable DTC inspection.
• If there is not a DTC, replace the instrument cluster.
|
||