DTC U2005:86 [AUTO LEVELING CONTROL MODULE]
id090277017700
|
Description |
Error signal received from PCM |
|---|---|
|
Detection condition
|
• The auto leveling control module received vehicle speed signal error from the PCM for 5 s or more with the ignition switched ON (engine off or on).
|
|
Fail-safe
|
• The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
|
Possible cause
|
• DTCs are stored in the PCM.
• PCM malfunction
• Auto leveling control module malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY PCM DTCs
• Retrieve the PCM DTCs using the M-MDS.
• Is the DTC displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY IF MALFUNCTIONING LOCATION IS PCM DEPENDING ON REPEATABILITY
• Clear the auto leveling control module DTCs using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 5 s or more.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the PCM, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the auto leveling control module DTCs using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 5 s or more.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the auto leveling control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||