DTC B1A89:42 [CONNECTIVITY MASTER UNIT]
id0902n7106000
|
Description |
Tuner and amp unit internal malfunction |
|---|---|
|
Detection condition
|
• The connectivity master unit detects an DAB module malfunction in the tuner and amp unit with the ignition switched ON (engine off or on).
|
|
Fail-safe
|
Not applicable
|
|
Possible cause
|
• Tuner and amp unit malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY IF MALFUNCTIONING LOCATION IS TUNER AND AMP UNIT DEPENDING ON REPEATABILITY
• Clear the DTC for the connectivity master unit using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 7 s or more.
• Perform the DTC inspection for the connectivity master unit using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the tuner and amp unit, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||