INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE

id092200033600


Turn And Hazard Indicator Alarm


Using center display

For the setting procedure of the personalization features using the center display, refer to “CENTER DISPLAY PERSONALIZATION FEATURES”. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Using M-MDS

1.  Connect the M-MDS (IDS) to DLC-2.

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

(1)  “Module Programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and then select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume.
The volume of the turn and hazard indicator alarm can be changed.
High
Low / High
Instrument cluster


Lights-on Reminder Warning Alarm


Using center display

For the setting procedure of the personalization features using the center display, refer to “CENTER DISPLAY PERSONALIZATION FEATURES”. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Using M-MDS

1.  Connect the M-MDS (IDS) to DLC-2.

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

(1)  “Module Programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and then select option.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Lights-on Reminder Volume.
The volume for the lights-on reminder warning alarm can be changed.
Off
OFF / Low / High
Instrument cluster


Temperature

Note
•  When the ambient temperature display is switched, the set A/C cabin temperature gauge display is also changed.
•  For the setting procedure of the personalization features using the center display, refer to “CENTER DISPLAY PERSONALIZATION FEATURES”. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Distance

•  For the setting procedure of the personalization features using the center display, refer to “CENTER DISPLAY PERSONALIZATION FEATURES”. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Parking Sensor

•  For the setting procedure of the personalization features using the center display, refer to “CENTER DISPLAY PERSONALIZATION FEATURES”. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)