DTC U3000:98 [FORWARD SENSING CAMERA (FSC)]
id1502a3028600
Forward Sensing Camera (FSC) Type B (VIN Serial No. 200001—)
|
Description |
Forward sensing camera (FSC) stops functioning due to temporary high temperature |
|---|---|
|
Detection condition
|
• The forward sensing camera (FSC) detects that its temperature is high and temporarily stops functioning.
|
|
Fail-safe
|
• Inhibits the lane departure warning system (LDWS).
• Inhibits the lane-keep assist system.
• Inhibits the adaptive LED headlights.
• Inhibits the high beam control (HBC) system.
• Inhibits the advanced smart city brake support (advanced SCBS).
|
|
Possible cause
|
• Ignition is switched ON (engine off or on) while the vehicle temperature is high.
• Forward sensing camera (FSC) malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY IF FORWARD SENSING CAMERA (FSC) TEMPERATURE WAS TEMPORARILY HIGH
• Leave the vehicle in a cool location.
• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
• Switch the ignition ON (engine off or on) and drive the vehicle at 10 km/h {6.2 mph} or more for 5 s or more.
• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
• Switch the ignition ON (engine off or on) and drive the vehicle at 10 km/h {6.2 mph} or more for 5 s or more.
• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the forward sensing camera (FSC), then go to the next step.
|
|
No
|
Verify the forward sensing camera (FSC) system operation record using the M-MDS.
• Explain the conditions to the customer referring to the forward sensing camera (FSC) system operation record.
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||