DTC C1105:62 [RADAR UNIT]


id1502a6017700

Description

Brake light signal malfunction

Detection condition
•  The radar unit detects that the brake switch signal and the brake light on/off are incompatible.
Fail-safe
•  Inhibits the Mazda radar cruise control (MRCC) system control
•  Inhibits the smart brake support (SBS) system control
•  Inhibits the distance recognition support system (DRSS) control (Radar unit type A (VIN serial No. 100001-))
Possible cause
•  Brake switch malfunction
•  DTCs are stored in the rear body control module (RBCM).
?  Brake light unit malfunction
•  DTCs are stored in the instrument cluster.
•  Radar unit malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action

1
INSPECT BRAKE SWITCH
•  Inspect the brake switch.
•  Is the brake switch normal?
Yes
Go to the next step.
No
Replace the brake switch, then go to the Step 4.
2
VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs
•  Retrieve the rear body control module (RBCM) DTCs using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
Go to the next step.
3
VERIFY INSTRUMENT CLUSTER DTCs
•  Retrieve the instrument cluster DTCs using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
Go to the next step.
4
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the DTC for the radar unit using the M-MDS.
•  Drive the vehicle at 40 km/h (25 mph) or more for 3 min or more.
•  Retrieve the radar unit DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Repeat the inspection from Step 1.
•  If the malfunction recurs, replace the radar unit.
Go to the next step.
No
Go to the next step.
5
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.