DTC U0415:00/U0415:68/U0415:82 [LASER SENSOR]
id1502b2705900
|
DTC
|
U0415:00
|
Signal error from DSC HU/CM
|
|
U0415:68
|
||
|
U0415:82
|
||
|
DETECTION CONDITION
|
• Error detected in signal from DSC HU/CM via CAN communication
|
|
|
FAIL-SAFE FUNCTION
|
• Master warning light Illuminates
• Smart City Brake Support (SCBS) control disabled
|
|
|
POSSIBLE CAUSE
|
• DSC HU/CM malfunction
|
|
|
SYSTEM WIRING DIAGRAM
|
—
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY DSC HU/CM DTC
• Using the M-MDS, perform the DSC HU/CM DTC inspection.
(See DTC INSPECTION [DSC HU/CM].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
DTC troubleshooting completed, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Using the M-MDS, clear the DTC from the laser sensor.
(See CLEARING DTC [LASER SENSOR].)
• Using the M-MDS, perform the laser sensor DTC inspection.
• Is the same DTC present?
|
Yes
|
Repeat the inspection from Step1.
If the malfunction recurs, replace the DSC HU/CM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY NO DTC IS PRESENT
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
(See DTC TABLE [LASER SENSOR].)
|
|
No
|
DTC troubleshooting completed.
|
||