DTC U0423:00/U0423:82 [LASER SENSOR]
id1502b2706100
|
DTC
|
U0423:00
|
Signal error from instrument cluster
|
|
U0423:82
|
||
|
DETECTION CONDITION
|
• Error detected in signal from instrument cluster via CAN communication
|
|
|
FAIL-SAFE FUNCTION
|
• Master warning light Illuminates
• Smart City Brake Support (SCBS) control disabled
|
|
|
POSSIBLE CAUSE
|
• Instrument cluster malfunction
|
|
|
SYSTEM WIRING DIAGRAM
|
—
|
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY INSTRUMENT CLUSTER DTC
• Using the M-MDS, perform the instrument cluster DTC inspection.
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
DTC troubleshooting completed, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Using the M-MDS, clear the DTC from the laser sensor.
(See CLEARING DTC [LASER SENSOR].)
• Using the M-MDS, perform the laser sensor DTC inspection.
• Is the same DTC present?
|
Yes
|
Repeat the inspection from Step1.
If the malfunction recurs, replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY NO DTC IS PRESENT
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
(See DTC TABLE [LASER SENSOR].)
|
|
No
|
DTC troubleshooting completed.
|
||