DTC U3000:49 [360°VIEW MONITOR CONTROL MODULE]

id1502c7056300

Description	360°view monitor control module internal malfunction
Detection condition	• Malfunction inside 360°view monitor control module detected.
Fail-safe	• Black screen displayed when system is starting
Possible cause	• 360°view monitor control module malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY IF MALFUNCTIONING LOCATION IS 360°VIEW MONITOR CONTROL MODULE DEPENDING ON REPEATABILITY • Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC [360°VIEW MONITOR CONTROL MODULE].) • Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION [360°VIEW MONITOR CONTROL MODULE].) • Is the same Pending DTC present?	Yes	Replace the 360°view monitor control module, then go to the next step. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED • Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [360°VIEW MONITOR CONTROL MODULE].)
2		No	DTC troubleshooting completed.