EXCESSIVE SPEED WARNING INDICATION IS NOT DISPLAYED WHILE VEHICLE SPEED EXCEEDS SPEED LIMIT [TRAFFIC SIGN RECOGNITION SYSTEM (TSR)]

• The detection performance of the forward sensing camera (FSC) has limitations and the traffic sign recognition system (TSR) may not operate normally. For the detection performance limitations, refer to the [FORWARD SENSING CAMERA (FSC)] in the technical guide.

• The forward sensing camera (FSC) operation record can be verified using the M-MDS.

Step	Inspection	Action
1	VERIFY PERSONALIZATION FEATURE SETTING • Verify that the personalization feature setting matches any of the following. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.) ? Warning display is off ? Excessive speed setting is other than +0 km/h • Is any of the above conditions met?	Yes	Perform the personalization feature setting in consultation with the customer. (See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.)
No	Go to the next step.
2	INSPECT PHENOMENON DUE TO DETECTION PERFORMANCE LIMITATIONS • Refer to the new vehicle instruction and inspect the detection performance of the forward sensing camera (FSC). • Inspect the forward sensing camera (FSC) operation record using the M-MDS. • Are the applicable items for the detection performance displayed?	Yes	The vehicle is normal. (Explain to the customer that the lane-keep assist system may not operate due to the detection performance limitations of the forward sensing camera (FSC).) Complete the symptom troubleshooting.
No	Go to the next step.
3	INSPECT ACTIVE DRIVING DISPLAY • Inspect the active driving display. (See ACTIVE DRIVING DISPLAY INSPECTION.) • Is the active driving display normal?	Yes	Go to the next step.
No	Replace the active driving display, then go to the next step. (See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION.)
4	VERIFY MALFUNCTION SYMPTOM • Has the malfunction symptom been eliminated?	Yes	Complete the symptom troubleshooting. (Explain repair contents to customer).
No	Repeat the diagnosis from Step 1. If the malfunction is not resolved, replace the forward sensing camera (FSC). (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)

Step

Inspection

Action

VERIFY PERSONALIZATION FEATURE SETTING

• Verify that the personalization feature setting matches any of the following.

(See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.)

? Warning display is off

? Excessive speed setting is other than +0 km/h

• Is any of the above conditions met?

Yes

Perform the personalization feature setting in consultation with the customer.

(See i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE.)

Go to the next step.

INSPECT PHENOMENON DUE TO DETECTION PERFORMANCE LIMITATIONS

• Refer to the new vehicle instruction and inspect the detection performance of the forward sensing camera (FSC).

• Inspect the forward sensing camera (FSC) operation record using the M-MDS.

• Are the applicable items for the detection performance displayed?

Yes

The vehicle is normal. (Explain to the customer that the lane-keep assist system may not operate due to the detection performance limitations of the forward sensing camera (FSC).)

Complete the symptom troubleshooting.

Go to the next step.

INSPECT ACTIVE DRIVING DISPLAY

• Inspect the active driving display.

(See ACTIVE DRIVING DISPLAY INSPECTION.)

• Is the active driving display normal?

Yes

Go to the next step.

Replace the active driving display, then go to the next step.

(See ACTIVE DRIVING DISPLAY REMOVAL/INSTALLATION.)

VERIFY MALFUNCTION SYMPTOM

• Has the malfunction symptom been eliminated?

Yes

Complete the symptom troubleshooting. (Explain repair contents to customer).

Repeat the diagnosis from Step 1.

If the malfunction is not resolved, replace the forward sensing camera (FSC).

(See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)