FOOT-MOTION DETECTION FUNCTION DOES NOT OPERATE [POWER LIFTGATE (PLG) SYSTEM]
id0903c9090800
Description |
The liftgate does not auto open/auto close even though the kicking motion is made in the direction of the foot-motion detection sensors. |
---|---|
Detection condition
|
• Power liftgate (PLG) control module memorizes DTC
• Foot-motion detection sensor has a malfunction
• Foot-motion detection sensor unit has a malufunction
|
Diagnostic Procedure
Step |
Inspection |
Action |
|
---|---|---|---|
1
|
PERFORM POWER LIFTGATE (PLG) CONTROL MODULE DTC INSPECTION
• Perform the DTC inspection for the power liftgate (PLG) control module using the M-MDS.
• Are the same Pending DTCs present?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
Go to the next step.
|
||
2
|
DETERMINE IF MALFINCTION CAUSE IS FOOT-MOTION DETECTION SENSOR OR FOOT-MOTION DETECTION UNIT
• Replace the foot-motion detection sensor.
• Does the foot-motion detection function operate normally?
|
Yes
|
Complete the symptom troubleshooting. (Explain contents of repair to customer)
|
No
|
Replace the foot-motion detection unit. (See FOOT-MOTION DETECTION UNIT REMOVAL/INSTALLATION.)
|