BONNET LATCH SWITCH INSPECTION

id091400510600

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL.)

3.  Disconnect the bonnet latch switch connector. (See BONNET LATCH REMOVAL/INSTALLATION.)

4.  Verify that the continuity is as indicated in the table.

Note

•  Inspect the continuity when the bonnet is open and closed.

ac9wzw00004270

ac9wzw00004271

•  If the operation as indicated in the table cannot be verified, replace the bonnet latch.