NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [SKYACTIV-G 2.5T]

id1103b2000800

Type A (VIN Serial No. TC*# 100001—400000/ TB*# 100001—700000)

3	i-stop INDICATOR LIGHT (GREEN) FLASHES
DESCRIPTION	• i-stop indicator light (green) remains flashing during idling. • i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE	Note • If the brake pedal depression is insufficient, the i-stop indicator light (green) illuminates and the i-stop function operates by increasing brake pedal depression. • i-stop operation conditions are not met. i-stop function operation conditions are not set • False detection of insufficient brake depression (fluid pressure). ? Brake fluid pressure sensor (built-into DSC HU/CM) malfunction

i-stop INDICATOR LIGHT (GREEN) FLASHES

DESCRIPTION

• i-stop indicator light (green) remains flashing during idling.

• i-stop indicator light (green) remains flashing during i-stop.

POSSIBLE CAUSE

Note

• If the brake pedal depression is insufficient, the i-stop indicator light (green) illuminates and the i-stop function operates by increasing brake pedal depression.

• i-stop operation conditions are not met.

i-stop function operation conditions are not set

• False detection of insufficient brake depression (fluid pressure).

? Brake fluid pressure sensor (built-into DSC HU/CM) malfunction

Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY DTC • Retrieve the PCM, DSC HU/CM and instrument cluster DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)].) (See DTC INSPECTION [DSC HU/CM].) (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5T)].) (See DTC TABLE [DSC HU/CM].) (See DTC TABLE [INSTRUMENT CLUSTER].)
1		No	Go to the next step.
2	INSPECT BRAKE FLUID PRESSURE SENSOR • Inspect the brake fluid pressure sensor. (See BRAKE FLUID PRESSURE SENSOR INSPECTION.) • Is there any malfunction?	Yes	Go to the next step.
2		No	Replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].) Go to the next step.
3	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5T].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ? If the vehicle is repaired, troubleshooting is completed. ? If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

Type B (VIN Serial No. TC*# 400001—/ TB*# 700001—)

3	i-stop INDICATOR LIGHT (GREEN) FLASHES
DESCRIPTION	• i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE	• i-stop operation conditions are not met.

Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY DTC • Retrieve the PCM, DSC HU/CM and instrument cluster DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)].) (See DTC INSPECTION [DSC HU/CM].) (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5T)].) (See DTC TABLE [DSC HU/CM].) (See DTC TABLE [INSTRUMENT CLUSTER].)
1		No	Go to the next step.
2	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5T].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ? If the vehicle is repaired, troubleshooting is completed. ? If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)