DTC U0533:81 [360°VIEW MONITOR CONTROL MODULE]
id1502c7056100
|
Description |
Error signal received from blind spot monitoring (BSM) control module (LH) |
|---|---|
|
Detection condition
|
• The 360°view monitor control module detects a signal error from the blind spot monitoring (BSM) control module (LH) for a certain period of time or more.
|
|
Fail-safe
|
• Not applicable
|
|
Possible cause
|
• DTCs are stored in the blind spot monitoring (BSM) control module (LH).
• Blind spot monitoring (BSM) control module (LH) malfunction
• 360°view monitor control module malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY OTHER 360°VIEW MONITOR CONTROL MODULE DTCs
• Clear the DTC for the 360°view monitor control module using the M-MDS.
• Retrieve the 360°view monitor control module DTCs using the M-MDS.
• Is DTC U3000:41 or U3000:49 displayed?
|
Yes
|
Replace the 360°view monitor control module, then go to Step 4.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) DTCs
• Retrieve the blind spot monitoring (BSM) control module (LH) DTCs using the M-MDS.
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF MALFUNCTIONING LOCATION IS BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) DEPENDING ON REPEATABILITY
• Clear the DTC for the 360°view monitor control module using the M-MDS.
• Retrieve the 360°view monitor control module DTCs using the M-MDS.
• Is the same Pending DTC present?
|
Yes
|
Replace the blind spot monitoring (BSM) control module (LH), then go to the next step.
|
|
No
|
Go to Step 5.
|
||
|
4
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the 360°view monitor control module using the M-MDS.
• Retrieve the 360°view monitor control module DTCs using the M-MDS.
• Is the same Pending DTC present?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the 360°view monitor control module.
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||