HORN INSPECTION

id092200012700

Horn LO

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

4.  Remove the horn LO. (See HORN REMOVAL/INSTALLATION.)

5.  Apply battery positive voltage to horn LO terminal A, and connect the horn LO retaining bolt to ground as shown in the figure, and then verify that the horn LO sounds.

ac9uuw00006758

•  If the horn LO does not sound, replace the horn LO. (See HORN REMOVAL/INSTALLATION.)

Horn HI

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL.) (See FRONT BUMPER INSTALLATION.)

4.  Remove the horn HI. (See HORN REMOVAL/INSTALLATION.)

5.  Apply battery positive voltage to horn HI terminal 1A, and connect the horn HI terminal 2A to ground as shown in the figure, and then verify that the horn HI sounds.

ac9uuw00006759

•  If the horn HI does not sound, replace the horn HI. (See HORN REMOVAL/INSTALLATION.)