No.1 MESSAGE RELATED TO i-ELOOP SYSTEM MALFUNCTION INDICATED IN DISPLAY [i-ELOOP]

id130301003100


Description

•  Message related to i-ELOOP system malfunction indicated in display.
•  Master warning light is illuminated

Possible Cause


i-ELOOP-related component malfunction (DTCs are detected)

•  Capacitor (i-ELOOP) malfunction
•  DC-DC converter (i-ELOOP) malfunction
•  PCM malfunction
•  Connectivity master unit (CMU) malfunction
•  i-ELOOP-related part wiring harness malfunction


Instrument cluster incorrect display

•  Instrument cluster malfunction
•  Center display incorrect display (With center display)


Diagnostic Procedure

STEP

INSPECTION

RESULTS

ACTION
1
VERIFY DTCs
•  Retrieve the PCM, DC-DC converter (i-ELOOP), connectivity master unit (CMU) and instrument cluster DTCs using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [PCM (SKYACTIV-G 2.5T)].)
(See DTC TABLE [i-ELOOP].)
(See DTC TABLE [CONNECTIVITY MASTER UNIT].)
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
Go to the next step.
2
INSPECT INSTRUMENT CLUSTER
•  Inspect the instrument cluster.
•  Is the instrument cluster normal?
Yes
Replace the center display.
(See CENTER DISPLAY REMOVAL/INSTALLATION.)
No
Replace the instrument cluster.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)