•  The blind spot monitoring (BSM) warning light flashes despite not satisfying the blind spot monitoring (BSM) warning light flashing conditions (vehicle speed above 10 km/h {6.2 mph} (Australian specs.)/30 km/h {19 mph} (except Australian specs.) or more, turn signal on, and vehicle in warning zone).

•  The blind spot monitoring (BSM) warning light flashes, but the turn signals are off.

•  Both blind spot monitoring (BSM) warning light flashes under conditions other than the RCTA activation conditions (selector lever is in R position and target vehicle detection).

•  Blind spot monitoring (BSM) OFF indicator light does not illuminate when the ignition is switched to ON.

•  The blind spot monitoring (BSM) control module does not communicate with the M-MDS.

•  Blind spot monitoring (BSM) warning light does not illuminate even though blind spot monitoring (BSM) switch turns off the system after ignition switch is turned to ON position.

•  The blind spot monitoring (BSM) OFF indicator light illuminates for 3 s or more without the blind spot monitoring (BSM) switch turning off after the ignition switch is turned to the ON position.

•  The blind spot monitoring (BSM) warning light illuminates, but the conditions to illuminate the blind spot monitoring (BSM) warning light are not satisfied (vehicle speed above 10 km/h {6.2 mph} (Australian specs.)/30 km/h {19 mph} (except Australian specs.) or more, turn signals off, and vehicle in warning zone).

•  The blind spot monitoring (BSM) warning light does not illuminate despite satisfying the conditions to illuminate the blind spot monitoring (BSM) warning light (vehicle speed above 10 km/h {6.2 mph} (Australian specs.)/30 km/h {19 mph} (except Australian specs.) or more, turn signals off, and vehicle in warning zone).

•  The blind spot monitoring (BSM) warning light does not flash or illuminate continuously, but the conditions to flash the blind spot monitoring (BSM) warning light are satisfied (vehicle speed above 10 km/h {6.2 mph} (Australian specs.)/30 km/h {19 mph} (except Australian specs.) or more, turn signal on, and vehicle in warning zone).

•  Both blind spot monitoring (BSM) warning light does not flash under conditions even through under the RCTA activation conditions (selector lever is in R position and target vehicle detection).

•  Blind spot monitoring (BSM) warning light does not flash or illuminate continuously, but turn signals are off.

•  Blind spot monitoring (BSM) warning alarm sounds but blind spot monitoring (BSM) warning light does not flash.

•  Blind spot monitoring (BSM) warning alarm is triggered on side opposite to the direction in which turn signal is operated.

•  The blind spot monitoring (BSM) control module recognizes that vehicle is in warning zone on side in which turn signal is operated, but blind spot monitoring (BSM) warning alarm does not sound despite blind spot monitoring (BSM) warning light flashing.

•  The blind spot monitoring (BSM) system cannot detect vehicle.