LIFTGATE OPENER SWITCH INSPECTION

id091400516200

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

(2)  Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Liftgate recess cover (See LIFTGATE RECESS REMOVAL/INSTALLATION.)

(4)  Power liftgate (PLG) rear switch (with power liftgate) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION.)

(5)  Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)

(6)  Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION.)

(7)  Rear finisher (See REAR FINISHER REMOVAL.)

(8)  Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION.)

3.   Verify the continuity of liftgate opener switch terminals A and C.

ac9uuw00009444

•  If not as indicated in the table, replace the liftgate opener switch.

ac9uuw00009445