FOOT SUPPORT REMOVAL/INSTALLATION

id091700606100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(4)  Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(5)  Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)

(6)  Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)

(7)  Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(8)  Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

3.  Partially peel back the floor covering.

4.  Remove the fastener.

With 360° view monitor control module

ac9wzw00005400

Without 360° view monitor control module

ac9uuw00005644

5.  Pull the foot support in the direction of the arrow and remove it.

With 360° view monitor control module

ac9wzw00005401

Without 360° view monitor control module

ac9uuw00005645

6.  Install in the reverse order of removal.