DTC TABLE [SAS CONTROL MODULE]

id0802g6080700

Caution

•  When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC				System malfunction location	Fail safe	Drive cycle	Self test type*1	Memory function	Page
M-MDS display	Air bag system warning light
	Flashing pattern		Priority ranking
B0001:11	19		18	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE].)
B0001:12				Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13				Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19				Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A				Driver-side air bag module circuit resistance low	—	—	C, D	×
B0001:55				Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)
[B0002:11]	19		18	Driver-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0002:12]				Driver-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0002:13]				Driver-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0002:19]				Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0002:1A]				Driver-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0002:55]				Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
B0003:53	?	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE].)
B0010:11	21		17	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE].)
B0010:12				Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13				Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19				Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A				Passenger-side air bag module circuit resistance low	—	—	C, D	×
B0010:55				Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)
[B0011:11]	21		17	Passenger-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0011:12]				Passenger-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0011:13]				Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0011:19]				Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0011:1A]				Passenger-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0011:55]				Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
[B0072:11]	34		19	Passenger-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0072:12]				Passenger-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B0072:13]				Passenger-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B0072:19]				Short circuit to passenger-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B0072:1A]				Passenger-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B0072:55]				Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B0094:11	42		10	Driver-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:13/B0094:87/B0094:96 [SAS CONTROL MODULE].)
B0094:13				Driver-side crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
B0094:87				Signal reception error from driver-side crash zone sensor	—	—	C, D	×
B0094:96				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:55				Configuration setting error (driver-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE].)
[B00A0:09]	16		29	Occupant classification sensor internal signal output unstable	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00A0:28]				Occupant classification sensor calibration setting invalid	—	—	D	×
[B00A0:4A]	15		6	Occupant classification sensor ID mismatch	—	—	C, D	×
[B00A0:54]	16		29	Occupant classification sensor calibration setting not set	—	—	C, D	×
[B00A0:81]				Occupant classification sensor memory check sum error	—	—	C, D	×
[B00A0:87]				No signal received from occupant classification sensor	—	—	C, D	×
[B00C0:93]				Occupant classification sensor malfunction	—	—	C, D	×
[B00C1:93]				Occupant classification sensor malfunction	—	—	C, D	×
B00D2:01	14		5	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE].)
B00D2:29				Invalid signal to air bag system warning light	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE].)
[B00D5:01]	18		30	PAD OFF indicator circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00D5:29]				PAD indicator communication error	—	—	C, D	×
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE].)
B10FD:11	43		14	Driver-side side air bag sensor No.1 circuit short to body ground	—	—	C, D	×	(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96 [SAS CONTROL MODULE].)
B10FD:13				Driver-side side air bag sensor No.1 circuit open circuit or short to power supply	—	—	C, D	×
B10FD:87				Signal reception error from driver-side side air bag sensor No.1	—	—	C, D	×
B10FD:96				Driver-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FD:55				Configuration setting error (driver-side side air bag sensor No.1 structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)
B10FE:11	44		13	Passenger-side side air bag sensor No.1 circuit short to body ground	—	—	C, D	×	(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96 [SAS CONTROL MODULE].)
B10FE:13				Passenger-side side air bag sensor No.1 circuit open circuit or short to power supply	—	—	C, D	×
B10FE:87				Signal reception error from passenger-side side air bag sensor No.1	—	—	C, D	×
B10FE:96				Passenger-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FE:55				Configuration setting error (passenger-side side air bag sensor No.1 structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)
B1126:11	22		24	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE].)
B1126:12				Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13				Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19				Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A				Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55				Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)
B1127:11	23		23	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE].)
B1127:12				Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13				Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19				Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A				Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55				Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)
B1128:11	24		26	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE].)
B1128:12				Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13				Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19				Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A				Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55				Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)
B1129:11	25		25	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE].)
B1129:12				Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13				Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19				Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A				Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55				Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE].)
B1196:11	45		16	Driver-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See DTC B1196:11/B1196:13/B1196:87/B1196:96 [SAS CONTROL MODULE].)
B1196:13				Driver-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×
B1196:87				Signal reception error from driver-side side air bag sensor No.2	—	—	C, D	×
B1196:96				Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
B1196:55				Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×	(See DTC B1196:55/B1197:55 [SAS CONTROL MODULE].)
B1197:11	46		15	Passenger-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See DTC B1197:11/B1197:13/B1197:87/B1197:96 [SAS CONTROL MODULE].)
B1197:13				Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×
B1197:87				Signal reception error from passenger-side side air bag sensor No.2	—	—	C, D	×
B1197:96				Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
B1197:55				Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×	(See DTC B1196:55/B1197:55 [SAS CONTROL MODULE].)
[B1202:01]	18		30	PAD ON indicator circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
B1206:00	?	?	?	SAS control module collision judgement signal output (fuel cut signal output)	?	?	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE].)
B1211:11	38		22	Driver-side front pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE].)
B1211:12				Driver-side front pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13				Driver-side front pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19				Short circuit to driver-side front pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A				Driver-side front pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55				Configuration setting error (driver-side front pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)
B1214:11	39		21	Passenger-side front pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE].)
B1214:12				Passenger-side front pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13				Passenger-side front pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19				Short circuit to passenger-side front pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A				Passenger-side front pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55				Configuration setting error (passenger-side front pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)
[B1226:11]	36		12	Driver-side pressure sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1226:13]				Driver-side pressure sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1226:87]				Signal reception error from driver-side pressure sensor	—	—	C, D	×
[B1226:96]				Driver-side pressure sensor internal malfunction	—	—	C, D	×
[B1226:55]				Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×
[B1227:11]	37		11	Passenger-side pressure sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1227:13]				Passenger-side pressure sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1227:87]				Signal reception error from passenger-side pressure sensor	—	—	C, D	×
[B1227:96]				Passenger-side pressure sensor internal malfunction	—	—	C, D	×
[B1227:55]				Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×
[B1228:11]	35		20	Driver-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]				Driver-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]				Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]				Short circuit to driver-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]				Driver-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]				Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B1410:11	33		28	Driver-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1410:11/B1410:12/B1410:13/B1410:19/B1410:1A [SAS CONTROL MODULE].)
B1410:12				Driver-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1410:13				Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1410:19				Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1410:1A				Driver-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1410:55				Configuration setting error (driver-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1410:55/B1412:55 [SAS CONTROL MODULE].)
B1412:11	32		27	Passenger-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1412:11/B1412:12/B1412:13/B1412:19/B1412:1A [SAS CONTROL MODULE].)
B1412:12				Passenger-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1412:13				Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1412:19				Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1412:1A				Passenger-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1412:55				Configuration setting error (passenger-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1410:55/B1412:55 [SAS CONTROL MODULE].)
[B1413:11]	41		9	Driver-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1413:13]				Driver-side crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1413:87]				Signal reception error from driver-side crash zone sensor	—	—	C, D	×
[B1413:96]				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
[B1413:55]				Configuration setting error (driver-side crash zone sensor structural malfunction)	—	—	C, D	×
B1417:11	41		9	Passenger-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B1417:11/B1417:13/B1417:87/B1417:96 [SAS CONTROL MODULE].)
B1417:13				Passenger-side crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
B1417:87				Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
B1417:96				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:55				Configuration setting error (passenger-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE].)
B143A:00	?	?	?	SAS control module collision judgement signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE].)
C0061:29	?	?	?	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29/P0666:29 [SAS CONTROL MODULE].)
C0062:29				Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29				Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
P0666:29				Temperature sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	14		5	Module communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE].)
U0155:00				Communication error with instrument cluster	—	—	C, D	×
U0300:00	54		7	Configuration setting invalid	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)
U2005:68	14		5	PCM communication error (vehicle speed signal)	—	—	C, D	×	(See DTC U2005:68 [SAS CONTROL MODULE].)
U2100:00	?	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)
U2107:00	?	?	?	SAS control module collision judgement signal output (ESS request signal output)	?	?	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE].)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE].)
U3003:16	?	Continuously illuminated	1	SAS control module power supply voltage decreases (9 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE].)
U3003:17				SAS control module power supply voltage increases (18 V or more)	—	—	C, D	×

Inspection for DTCs not usually displayed so the related function is not equipped

Diagnostic procedure